|
|
Underwater Hull Lights
Underwater Hull Lights
Underwater Boat Lights,
ideal for night fishing light, submersible lighting available in silicon bronze for utmost resistance against corrosion and electrolysis action. This purpose built
boat thru-hull lighting is fully accessible from inside the boat for servicing and/or bulb changes. Lens made from 15mm ground glass. End cap and cable gland made of tough, non-corrosive glass-reinforced nylon. The standard thru-Hull
light "under water light for a boat" fixture may be used with a 50W MR16 halogen reflector bulb. The
35W HID Xenon
Version comes standard with an IP65 ballast complete with preformed cabling and AMP connectors. For uneven inner mounting surfaces, an optional self-leveling mounting
lights kit is available and includes a floating bronze clamp ring and 4 bronze set screws. A 4' extension harness is also available for locating ballast in a remote location.
thru hull light -
Offering a full line of quality
light.
| Thru Hull Lighting Features & Benefits |
IML Halogen UW Specifications |
- Machined Silicon Bronze Body/Lens Bezel
- Low Profile Trim Bezel for Optimal Hydrodynamics
- Injection-Molded Glass Reinforced nylon end cap and cable
gland
- Silicone rubber mounting washer
- High temperature Silicone inner O-Ring seals
- Optional self-leveling mounting Kit (incl. floating clamp
ring and 4 set screws)
-
Silicon Bronze CLR HID Xenon
lights offers the best brilliance
|
- Applications: Fiberglass or wood bottoms &
Hull Transoms
- Ideal for night fishing
- Voltage: 12VDC or 24VDC
- Amp draw: 4.17 amps @ 12V, 2.08 amps @ 24V
- Lamp (sold separately on some units) Osram IRC 12V/50W MR16
24dg., 5700 cd, 3100K Color
- Satco IRC 24V/50W MR 16 38dg., 2850 cd, 2850 cd, 3100 color
- Max Hull thickness: 71mm/2.8" (63mm/2.48" with silicon
washer)
- Cutout: 79.5mm 3-3/16"
- Glass lens: 15mm tempered ground glass
- Casing and Bezel material: Silicon Bronze
- Weight: 4.5 lbs (5.5 lbs with ballast)
- Models ILIM82010 & ILIM85020 Come with Xenon
bulbs 35W
|
|